ECONOMICAL CONCEPTION, 600 - 700 BAR WORKING PRESSURE...

PH 4 CC (HIGH PRESSURE) INDUSTRIAL PISTON PUMPS

Technical Data

Displacement4 cc
Theoretical Oil Flow at Pump Speed2,70 cc at 1000 rpm
Theoretical Oil Flow at Pump Speed4,05 cc at 1500 rpm
Max. Continuous Speed3000 rpm
Max. Limited Speed3500 rpm
Max. Continuous Pressure600 bar
Max. Peak Pressure700 bar
Weight (Without Inlet Fitting)5,50 kg
Weight (With Inlet Fitting)5,60 kg
FluidMineral Based Hyd. Oils
InletG 1 inch
OutletG 3/8 inch

Dimensions

Ordering Code

PH Piston Pump, High Pressure, 600/700 bar.

Pump Code: PH

Displacement (cm3): 2cc to 45cc

Accessories

PH have the following advantages;

600 bar Cont. Work. Pressure, 700 bar Peak Pressure, For Industrial Area, Economical Conception, High Rotating Speeds, High Output Pressure. From 02cc to 45cc, Reduced Noise Level, Special Cast Iron with Raw Materials ..

PH Piston Pumps starting at ; 2cc, 4cc, 6cc, 12cc, 15cc, 22cc, 35cc, 45cc.

More details available at PH Official Catalog..


Other Advantages of PH

Designed for Industrial Presses.

For use in industrial and stationary applications areas.

The pump drive shaft bearings are designed to give the service life expected in these areas of operation.

Interchangeable with other high pressure piston pumps.

Conical Keyed Shaft, Easy to Install


Why PH Pumps ?

PH Axial Piston Pumps are of the stationary cylinder block type. The inclined swashplate is turned by the drive shaft, thus causing the alternate movement of the pistons.

Fluid enters the pistons via a groove in the swashplate and is expelled via check valves, self-priming if required. The forces on the shaft are taken up by bearings. The pump body is made of forged steel.

A precise calculation of the stability of the films of fluid between the friction surfaces means that there is virtually no wear on the moving parts.


Flow, Efficiency, Performance

Flow is proportional to drive speed and displacement.

For axial piston units with bent-axis design, the Pistons are arranged diagonally with respect to the drive shaft. The pump covers the whole displacement range 2 to 45 cm3/rev.

The pump has been developed with modern styling and design to satisfy market demand as to designed new generation plate and pistons with give high flow performance, high pressures with high efficiency and very small dimensions.


Pressure, Speed and Flow list of PH

The pump is available both to DIN, ISO and SAE world standards and can be mounted either directly at the gear box or via a drive shaft.

Other brand piston pumps compatible and interchangeable with PH (High Pressure) Industrial Piston Pumps.

Refer to the data sheet and order confirmation for the technical data,operating conditions and operating limits of the piston pumps.



Fittings